[minhthang01]

Hệ thống quảng cáo SangNhuong.com

Máy đo pH/ORP/Nhiệt độ cầm tay Hanna HI 98172

HI 98172 Portable pH/ORP/ ISE Meter With Cal Check®

Máy đo pH, khả năng oxy hóa khử, Nhiệt độ cầm tay

Hãng sản xuất: HANNA

Xuất xứ: Romania

Model: HI98172

Giá: Liên hệ 0977.459.400



Máy đo pH hanna

The HI-98172 is a water resisitant pH/ORP/ISE meter. Up to five point pH calibration is available with seven memorised pH buffers and five custom pH buffers to provide users flexibility to adjust the calibration range to obtain the most accurate and precise readings.

Exchange the pH sensor for an ORP sensor to obtain mV readings. ISE sensors are calibrated up to five points and measurements are displayed in ppm.

Calibration Check incorporates an electrode condition graph which alerts the user with regards to the electrode status. If readings are taken too far outside the calibration range, the unit will warn the user with a graphic signal. Users may set a reminder to notify when calibration is due.

The HI-98172 features tutorial messages on the LCD and an auto-end mode to ensure readings are taken only when they are stable. Comprehensive GLP data are directly accessible by pressing the GLP key and log-on-demand holds up to 500 records. Data can be transferred to a PC via USB with optional HI 92000 software and HI 920014 USB connection cable.

Thiết bị đo ph hanna

Key features

• pH Calibration Check
• Five point pH calibration with seven standard and five custom pH buffers
• Log on demand (500 samples)
• User-selectable "calibration time out"
• Tutorial messages on LCD
• Optional PC interface via USB

Supplied with

• HI 1230B pH electrode
• HI 7662 temperature probe
• HI 70004 pH 4.01 buffer solution sachet
• HI 70007 pH 7.01 buffer solution sachet
• 100 mL plastic beaker
• Batteries
• Instructions
• Hard carrying case

Máy đo pH/ORP/Nhiệt độ cầm tay Hanna HI 98172


RangepH-2.0 to 16.0; -2.00 to 16.00 pH

ResolutionpH0.1; 0.01 pH

AccuracypH±0.01; ±0.01 pH

RangemV±699.9 mV; ±2000 mV

ResolutionmV0.1; 1 mV

AccuracymV±0.2 mV (±699.9 mV); ±1 mV (±2000 mV)

RangeISE0.001 to 19990 ppm

ResolutionISE0.001 ppm (from 0.001 to 1.999) 0.01 ppm (from 2.00 to 19.99) 0.1 ppm (from 20.0 to 199.9) 1 ppm (from 200 to 1999) 10 ppm (from 2000 to 19990)

AccuracyISE±0.5% f.s.

RangeTemperature-20.0 to 120.0 °C (-4.0 to 248.0°F)

ResolutionTemperature0.1° (0.1°F)

AccuracyTemperature±0.4°C (±0.8°F) excluding probe error

pH Calibration Up to 5 calibration points; 7 standard buffers available (pH buffers 1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45) and 5 custom buffers

ISE Calibration Up to 5 point calibration, 6 standard buffers available (0.1, 1, 10, 100, 1000, 10000 ppm)

Slope/Offset Calibration ±1 pH/From 80 to 110%

Relative mV Offset Range ±2000 mV

Temperature Compensation Automatic or manual from -20.0 to 120.0°C (-4.0 to 248.0°F)

Electrodes HI 1230B pH electrode; HI 7662 temperature probe (included)

Log-On-Demand On demand, 50 samples on each range

Computer Interface RS232 (HI 92000 software required)

Input Impedance 10[sup]12[/sup] ohms

Battery Type / Life (4) 1.2V AA rechargeable batteries, approx. 200 hrs continuous use without backlight. Battery charger included. User-selectable auto off: 1-30 min. or disabled.

Environment 0 to 50°C (32 to 122°F); RH 100%

Dimensions 196 x 80 x 60 mm (7.7 x 3.1 x 2.4")

Weight 425 g (15 oz.)